See your real countertop price
Answer six quick questions about your kitchen or bath and you'll get an installed price built from our actual 2026 numbers: slab, fabrication, edge profile, sink cutouts, licensed installation and tax. Not a range. Not a "starting at."
- No showroom visit
- No salesperson
- Nobody calling you tonight
Why free? Homeowners who already know their number are the easiest people for us to work with. We'd rather you find out now than after four appointments.
Start below by picking your stone. Not sure of your square footage? We show you how to measure on the next step.
- 1 Color
- 2 Measure
- 3 Sinks
- 4 Edge
- 5 Extras
- 6 Your price
Pick your stone
How much countertop?
Backsplash for this area optional
Anything else in stone? optional
Same stone, same price per square foot as your counters. We used to send these to an estimator. Now you can price them yourself.
Job total is under the 30 SF minimum. You'll be billed for 30 SF.
How to measure in 2 minutes
- Break your counters into rectangles. Don't overthink corners.
- Measure each one in inches: length × depth. Standard depth is 25.5" with overhang.
- Multiply length × depth, then divide by 144. That's square feet.
- Add the rectangles together.
Example: a 96" × 25.5" run = 2,448 ÷ 144 = 17 SF.
Measure each area separately, and put an island on its own tab if it's a different color. Round up. We confirm exact footage with a digital template before fabrication, and your final price follows the template, not this estimate.
Sinks
Buy your sink from us and we add the cutout for you, so it never gets missed on your quote. Supplying your own? Tell us how many cutouts you need and what type.
Cutouts needed for customer-supplied sinks
Kitchen cutouts and vanity/bar cutouts are priced differently. Pick the right one.
Pick your edge profile
Every standard edge is included in your square-foot price at 3cm. Premium profiles are charged per linear foot of finished edge. Pick one for the whole job.
Extras
Faucet holes are required on any job with a sink. Everything else here is optional, so only add what applies.
Does your project include any of these?
This one needs a set of human eyes on the seam layout. Check it if it applies and we'll route you to our estimating team instead of giving you a number we can't stand behind.